TZT
SG90 Micro servo motor (SG90)
Micro servo motor
• Full datasheet (PDF)
• Stall torque: 1.5 kg·cm (6 V)
• Operating voltage: 4.8 V to 6 V
• Limit angle : 180 degrees
• Operating speed: 0.12s / 60degrees (4.8V)
• Idle Current :6 mA (6V)
• Running Current : 120 mA (6V)
• Stall Current : 800 mA (6V)
• Temperature range: -30 ºC to 60 ºC
• Weight: 14.7g
• Dimension: 23 x 12 x 22.7 mm approx.
• Full datasheet (PDF)
• Stall torque: 1.5 kg·cm (6 V)
• Operating voltage: 4.8 V to 6 V
• Limit angle : 180 degrees
• Operating speed: 0.12s / 60degrees (4.8V)
• Idle Current :6 mA (6V)
• Running Current : 120 mA (6V)
• Stall Current : 800 mA (6V)
• Temperature range: -30 ºC to 60 ºC
• Weight: 14.7g
• Dimension: 23 x 12 x 22.7 mm approx.
1.5kg.cm @ 6V
MPU-9250 GY-9250 Inertial Measurement Unit (IMU) 9 DoF (Gyroscope-accelerometer-magnetic field) (TZT-GY-9250)
- MPU-9250 datasheet (PDF)
- GY-9250 Module schematic (JPG)
- MPU-9250 modules ( three-axis gyroscope + triaxial accelerometer + triaxial magnetic field )
- Use Chip : MPU-9250
- Power supply :3-5v ( internal low dropout regulator )
- Communication: IIC communication protocol standard
- Chip 16bit AD converter 16 outputs the data
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range : ± 2 ± 4 ± 8 ± 16g
- Magnetic field range : ± 4800uT
- Module size 15mm * 25mm
Ultrasonic sensor HC-SR04 HCSR04 (HCSR04)
- Working voltage: 5Vdc
- Quiescent current: less than 2mA
- Level output: High 5V
- Level output: Bottom 0V
- Sensing angle: not more than 15 degrees
- Detection range: 2cm-450cm
- High precision: up to 0.3cm
Small PIR motion sensor HC-SR505 (HC-SR505)
- Datasheet (PDF)
- Schematic (PDF)
- Operating Voltage: DC4.5-20V
- Static current: <60uA
- Output level: High 3.3V / Low 0V
- Trigger: repeatable trigger
- Delay time: 8S + -30%
- PCB Dimensions: 10 x 23mm
- Detection angle: <100 degree cone angle
- Detection distance: 3 meters
- Working temperature: -20 - +80 degrees
- Sensor Lens Dimensions: Diameter: 10mm
PIR motion sensor HC-SR501 (HC-SR501)
- Datasheet (PDF)
- Working voltage: DC5V-20V
- Quiescent Current: 65uA
- Level Output Voltage: High 3V / Low 0V
- Delaying time: 0.3~18s (adjustable)
- Blockade Time: 0.2s
- Trigger Method: L: unrepeatable trigger / H: repeatable trigger
- Detecting Range: 7m, less than 120 degree angle
- Working Temperature: -15'C ~ +70'C
- Screw hole pitch: 2.8mm
- Screw hole diameter: 2mm
- Ideal for DIY electronic circuit, sensor toys, sensor light, etc
Bracket for micro servo motors (SG90, FS90, FS90R, FT90M et FT90MR) (micro-servo-bracket)
Bracket to fix micro servo motors on your robot.
Compatible with : SG90, FS90, FS90R, FT90M et FT90MR
- 1