Feetech

• Anodized aluminum robot frame with 2 motors and 2 wheels
• Includes 2 wheels and 1 universal wheel
• Can be used with Arduino or Raspberry Pi with the motor shield or hat

• 2 x Motors FT90R-W
• 2 x FT-DC-W wheel
• 1 x Floor Frame (in anodized aluminum)
• 1 x Universal wheel
• 1 x Screw kit

• 100mm x 80mm x 27mm
• Wheel diameter = 60mm

• Equipped with a silicone tire
• Press-fit design to make connecting to your FS90R Micro Servo
• Super quick and easy to connect
• Wheels are 8mm wide
• Wheels diameter is 60mm (2.4inches)
• 2 additionnals mounting holes ease mounting on differents hubs

• Equipped with a silicone tire
• Press-fit design to make connecting to your FS90R Micro Servo
• Super quick and easy to connect
• Wheels are 8mm wide
• Wheels diameter is 60mm (2.4inches)
• 2 additionnals mounting holes ease mounting on differents hubs

• Voltage range : 3 à 6V
• Courant continu : 150 to 200mA
• Speed : 130RPM at 3V

• Dimensions: 32.3mm x 12.3mm x 29.9mm / 1.3" x 0.49" x 1.2"
• Spline Count: 21
• Weight: 8.4g
• No load speed: 110RPM (4.8v) / 130RPM (6v)
• Running Current (at no load): 100mA (4.8v) / 120mA (6v)
• Peak Stall Torque (4.8v): 1.3 kg/cm / 18.09 oz/in
• Peak Stall Torque (6v): 1.5 kg/cm / 20.86 oz/in
• Stall Current: 550mA (4.8v) / 650mA (6v)

Description:

specially designed for black (white) Seek the line, especially for complex black and white lines, testing lines of black and white cross, which has 5-channel infrared sensor with high sensitivity and 1-channel touch switch, able to accurately identify the black and white lines.

Module reasonably integrates six sensors, super cost-effective.

Rational layout sensor on a module, no need more DuPont wire connection, allowing you to design simple and elegant, to reduce the chance of error range, troubleshoot errors when it can more quickly find errors, saving time, effort.

Features:

Integrated 5CH tracking sensor with high sensitivity, low environmental impact, can accurately complex black line (white line) to track, for a simple black line tracing more ease. 

Black output low, white line output high.

Integrated infrared all the way to avoid Barrier Sensors, Avoid Barrier Distance is 15mm, there Obstacle Output HIGH matter.

A specially designed integrated is touch sensor, making the design and from the robot easier.

The module outputs are all high and low signal, Convenient and connected to the microcontroller.

All sensor output state has LED lights as an indicator to facilitate debugging.

Operating voltage of 3.0-5.5v to meet the needs of most systems.

Specification 

Weight: 9g

Dimension (L*W*H): 130mm * 34mm * 13mm

Output format: high and low signal 

Working Voltage Range: 3V~5.5V 

Recommended Voltage: 5V 

IDLE Current: 10Ma

Traction Distance: 0- 20mm (black and white line sensor)

Working Temperature: 0℃~60℃

Features 

Can be reprogram by FEETECH programmer

Easy to control 2CH DC motor 

Control DC motor to bidirectional continuous rotation 

The speed is linear response to PWM 

Accepts four mounting screws 

Easy to interface with any Arduino microcontroller or PWM-capable device 

Weighs only 3.5 g

Apply to kinds of small mobile platform robot

Specification 

Weight: 3.5g

Dimension (L*W*H): 34mm * 25mm * 7.5mm

Controller: STM8F003F3P6

Working Voltage Range: 4V~9V (2CH + and – connect together) 

Recommended Voltage: 6V 

IDLE Current: 10Ma

1CH Continuous Load Current: 1.3A 

Working Temperature: -5℃~60℃

• Anodized aluminum mini robot frame with 2 motors and 2 wheels
• Drive motors with 3-6VDC, 200-400mA run, 1.5A hard stall
• Includes 2 wheels and 1 plastic caster ball
• Can be used with Arduino or Raspberry Pi with the motor shield or hat

• 2 x 130 DC motor gear box
• 2 x FT-DC-W wheel
• 2 x Floor Frame (in anodized aluminum)
• 2 x DC bracket
• 1 x Bull 's-eye bearing wheel
• 1 x Screw kit

• 100mm x 80mm x 27mm
• Wheel diameter = 60mm

• Anodized aluminum mini robot frame with 4 motors and 4 wheels
• Includes 4 wheels 
• Can be used with Arduino or Raspberry Pi with the motor shield or hat

• 4 x Motors FT90R-W
• 2 x FT-DC-W wheel
• 1 x Floor Frame (in anodized aluminum)
• 1 x Screw kit

• 170mm x 100mm x 60mm
• Wheel diameter = 60mm